Evidence for Multiple Binding Modes in the Initial Contact Between SARS-CoV-2 Spike S1 Protein and Cell Surface Glycans**

Infection of host cells by SARS-CoV-2 begins with recognition by the virus S (spike) protein of cell surface heparan sulfate (HS), tethering the virus to the extracellular matrix environment, and causing the subunit S1-RBD to undergo a conformational change into the ‘open’ conformation. These two events promote the binding of S1-RBD to the angiotensin converting enzyme 2 (ACE2) receptor, a preliminary step toward viral-cell membrane fusion. Combining ligand-based NMR spectroscopy with molecular dynamics, oligosaccharide analogues were used to explore the interactions between S1-RBD of SARS CoV-2 and HS, revealing several low-specificity binding modes and previously unidentified potential sites for the binding of extended HS polysaccharide chains. The evidence for multiple binding modes also suggest that highly specific inhibitors will not be optimal against protein S but, rather, diverse HS-based structures, characterized by high affinity and including multi-valent compounds, may be required.     

基于Aspen Plus耦合生命周期评价的科研案例在环境工程原理教学中的应用

将化工流程模拟Aspen Plus软件与环境影响评估领域常用的生命周期评价(LCA)进行集成应用,围绕环境工程原理教学中有关化工过程质量能量衡算与环境污染防治内容的协同应用与拓展,构建化工流程模拟-环境风险评估科研案例“苯酐生产流程模拟及环境风险研究”,并将其作为环境工程原理的综合教学案例。教学实践经验表明,通过引入工程相关综合教学案例,不仅使得抽象的理论知识更加生动具体,而且在深化学生对课程理论知识理解的同时,提高学生应用专业知识分析和解决化工生产环境污染工程问题的综合能力和素质,为学生将来步入相关领域工作奠定扎实的基础。     

Study on gas adsorption and desorption characteristics on water injection coal

To study the desorption mechanism of methane in coal by H₂O injection and establish the Wiser molecular structure model of bituminous coal, the Grand Canonical Monte Carlo method was used to study the desorption behavior of CH₄ in coal with different amounts of H₂O injection at molecular scale. The results showed that at 293 K, the maximum adsorption capacity of H₂O was about 16 mmol/g, and that of CH₄ was about 8 mmol/g, which was about twice that of CH₄. This indicates that H₂O has a stronger adsorption capacity than CH₄. For methane-bearing coal, when the amount of water injected is 100, the average relative concentration of CH₄ is 0.5446, and the average relative concentration of CH₄ decreases by 33.77% compared to the water content of 20. Under the same time conditions, the root mean square displacement and diffusion coefficient of CH₄ decrease with the increase of H₂O injection quantity. With the increase of H₂O injection, the motion velocity of CH₄ in vacuum layer decreased. When water was injected, methane was trapped in the coal by water. The more H₂O injected, the more methane trapped in the coal, and the less methane desorption. This research lays a theoretical foundation for further research involving coal-water interaction.     

Ion transmission in an electrospray ionization-mass spectrometry interface using an S-lens

We present the design and performance of an in-house built electrospray ionization-mass spectrometry (ESI-MS) interface equipped with an S-lens ion guide. The ion source was designed specifically for our ion beam experiments to investigate the chemical reactivity and deposition of the clusters and nanoparticles. It includes standard ESI-MS interface components, such as nanoelectrospray, ion transfer capillary, and the S-lens. A custom design enables systematic optimization of all relevant factors influencing ion formation and transfer through the interface. By varying the ESI voltage and flow rate, we determined the optimal operating conditions for selected silica emitters. A comparison of the pulled silica emitters with different tip inner diameters reveals that the total ion current is highest for the largest tip, whereas a tip with the smallest diameter exhibited the highest transmission efficiency through the ESI-MS interface. Ion transmission through the transfer capillary is strongly limited by its length, but the loss of ions can be reduced by increasing the capillary voltage and temperature. The S-lens was characterized over a wide range of RF frequencies and amplitudes. Maximum ion current was detected at RF amplitudes greater than 50 V peak-to-peak (p/p) and frequencies above 750 kHz, with a stable ion transmission region of about 20%. A factor of 2.6 increase in total ion current is observed for 650 kHz as RF amplitudes reach 400 V p/p. Higher RF amplitudes also focus the ions into a narrow beam, which mitigates their losses when passing through the ion guide.     

Rapid separation and binding configuration prediction of the components in Danshen decoction to endothelin A receptor using affinity chromatography and molecular dynamics simulation

As a famous traditional Chinese formula, Danshen Decoction has the potential to relieve the pain of pulmonary arterial hypertension patients, however, the functional components remain unknown. Herein, we reported a method to screen the functional components in Danshen Decoction targeting endothelin receptor A, an accepted target for the treatment of the disease. The receptor was functionalized on the macroporous silica gel through an epidermal growth factor receptor fusion tag and its covalent inhibitor. Using the affinity gel as the stationary phase, the bioactive compound was identified as salvianolic acid B by mass spectrometry. The binding kinetic parameter (dissociation rate constants k_d) of salvianolic acid B with the receptor was determined via peak profiling. Using the specific ligands of the receptor as probes, the binding configuration prediction of salvianolic acid B with the receptor was performed by molecular dynamics simulation. Our results indicated that salvianolic acid B is a potential bioactive compound in Danshen Decoction targeting the receptor. This work showed that receptor chromatography in combination with molecular dynamics simulation is applicable to predicting the binding kinetics and configuration of a ligand to a receptor, providing crucial insight for the rational design of drugs that recognize functional proteins.     

电场下离子型聚合物复合囊泡结构变化的分子动力学模拟

利用粗粒化分子动力学模拟研究了电场作用下离子型聚合物复合囊泡形变与破裂的过程.定量分析了囊泡破裂过程中的结构变化,包括囊泡的形变程度、破裂速度、组分分布以及破裂后的结构.研究表明,电场强度较弱时,囊泡表面所吸附的聚电解质首先脱落,囊泡由球形结构转变为椭球结构.随着电场强度增大,离聚物的离子侧基发生重新排布,囊泡表面电荷的有序结构被破坏,导致囊泡的结构无法维持而破裂,囊泡塌缩,分裂形成离聚物团簇,并进一步破裂为小尺寸的离聚物聚集体,均匀分散于溶液中.本文利用分子动力学模拟明确了电场中离子型高分子复合囊泡破裂过程的分子机理,为药物释放技术的优化及发展提供了理论支持.     

正溴丁烷合成虚拟仿真系统的设计与辅助实验教学研究*

介绍了正溴丁烷合成虚拟仿真系统的设计与功能,并结合具体的教学实践和研究结果的对比分析,提出了虚实结合的混合式教学模式,这种教学模式能有效解决传统实验教学过程中实验预习效果差、过程性评价难的教学痛点。     

基于虚拟现实的分子对接教学软件*

由于其强大的沉浸性和交互性等特征,虚拟现实技术在教育教学方面有着独特的优势。基于分子建模工具和虚拟现实技术构建了一种关于分子对接的教学软件,该软件将语音讲解、动画演示、分子可视化、交互操作等内容有机整合在虚拟现实环境中,从理论知识讲解和VR实验操作2个方面展开,深入浅出地讲解了分子对接的知识点,达到辅助教学的目的。     

Controlled protein adsorption on a silica microparticle

In the present study, controlled protein adsorption on a rigid silica microparticle is investigated numerically using classical Langmuir and two-state models under electrokinetic flow conditions. The instantaneous particle locations are simulated along a straight microchannel using an arbitrary Lagrangian−Eulerian framework in the finite element method for the electrophoretic motion of the charged particle. Within the scope of the parametric study, the strength of the external electric field (E), particle diameter (D_p), the zeta potential of the particle (ζ_p), and the location of the microparticle away from the channel wall (H) are systematically varied. The results are also compared to the data of pressure-driven flow having a parabolic flow profile at the inlet whose maximum magnitude is set to the particle's electrophoretic velocity magnitude. The validation studies reveal that the code developed for the particle motion in the present simulations agrees well with the experimental results. It is observed that protein adsorption can be controlled using electrokinetic phenomena. The plug-like flow profile in electrokinetics is beneficial for a microparticle at every spatial location in the microchannel, whereas it is not valid for the pressure-driven flow. The electric field strength and the zeta potential of the particle accelerate the protein adsorption. The wall shear stress and shear rate are good indicators to predict the adsorption process for electrokinetic flow.     

ABC三嵌段共聚物胶束从多间隔结构到多核结构转变的Monte Carlo模拟

采用Monte Carlo模拟方法研究了疏水-亲水-疏水(H-P-H)型ABC三嵌段共聚物在B嵌段的选择性溶剂中的自组装行为. 模拟结果表明, 通过调节A嵌段和C嵌段的疏水性和二者之间的不相容性, 体系中可以形成多种形貌各异的胶束. 根据胶束中疏水核结构的特点, 这些胶束大体上可以被分为多核型胶束和多间隔型胶束两种类型. 通过增强疏水嵌段的疏水性或降低A嵌段和C嵌段间的不相容性, H-P-H型ABC三嵌段共聚物胶束能够发生从多核型胶束向多间隔型胶束的转变. 进一步分析胶束中聚合物的链构象等微观结构信息发现, A嵌段和C嵌段间的排斥作用和疏水作用之间存在竞争关系, 而这种竞争关系是影响体系中形成多核型胶束还是多间隔型胶束的决定性因素.